EAA Homebuilders Tony Bingelis Bibliography

Alphabetical Listing of Articles Written by Tony Bingelis and Published in Sport Aviation Magazine

• AN Fittings (SB)|SA90(3):29
• Adhesives (Pt.1)(SB)|SA88(10):33
• Adhesives (Pt.2)(SB)|SA88(11):29
• Adjustable stand,bench saw scarfer,tubing jig,fire safety (DC)|SA72(3):14-15
• Aircraft Parts Materials/Used,new,metal,wood,salvage (DC)|SA72(2):32
• Aircraft Seats/Design,construction,drawings (DC)|SA73(1):49
• Aircraft Wiring (SB)|SA95(3):71-75
• Aircraft Woodwork Basics (SB)|SA96(9):75-80
• Alignment Procedures (TB)|SA72(3):46-47
• Alignment during Construction (SB)|SA86(9):29
• Altitude Encoders (SB)|SA88(8):27
• Anchor Nuts (SB)|SA94(3):72-76
• Baffles (SB)|SA90(2):29-34
• Baffling your Lycoming (Pt.1)(SB)|SA86(10):27
• Baffling your Lycoming (Pt.2)(SB)|SA86(11):35
• Batteries (SB)|SA89(9):27
• Battery Box (SB)|SA75(10):74
• Battery Box Construction/Diagrams (SB)|SA75(11):16-17
• Battery Location (SB)|SA75(10):73
• Battery Problems(SB)|SA87(1):35
• Before You Try Your Hand with Fiberglass (SB)|SA96(2):83-87
• Before it Goes to Airport (SB)|SA94(10):86-91
• Better Paint Job Tips(SB)|SA92(8):82-87
• Biplane Rigging (SB)|SA88(2):27
• Blunders/Mistakes due to haste,carelessness,inexperience (SB)|SA77(7):12
• Brake Installation (SB)|SA87(10):31
• Brakes, Parking(SB)|SA83(6):27
• Brakes/Mechanical,hydraulic (DC)|SA74(3):25-26,60-61
• Builders Never Had It So Good (SB)|SA96(8):74-80
• Building Sequence (SB)|SA93(11):69
• Building Wood Fuselages (SB)|SA96(5):73-78
• Bungee Cords (DC)|SA73(5):48
• Bungee Installation Tool (SB)|SA88(9):27
• Bushings and Bearings (SB)|SA80(5):60
• Cabin,Cockpit Heat (SB)|SA76(4):33
• Cable Terminals & Connections (SB)|SA81(10):39
• Canopies (SB)|SA92(10):112-117
• Canopy Latches (SB)|SA78(10):19
• Canopy Options (SB)|SA84(2):15
• Canopy Retention (SB)|SA78(10):16
• Canopy, Sliding (SB)|SA84(3):27
• Carving Foam Seats (SB)|SA90(8):28-32
• Clamps & Clamping(SB)|SA83(2):30
• Closing a Wood Structure (DC)|SA74(4):53
• Cockpit Mock-up (SB)|SA76(5):60
• Cockpit Noise (SB)|SA92(6):80-84
• Cockpit Standardization [Panels](SB)|SA79(9):35
• Cockpit Ventilation (SB)|SA76(6):26
• Construction Methods/Metal wing ribs (Pt 2)(SB)|SA76(10):24-26
• Control Cable Fabrication (DC)|SA72(6):35
• Control Cable Routing (DC)|SA73(8):17
• Control Surface Balancing In Homebuilts (SB)|SA96(12):76-80
• Control Surface Flutter Problems (SB)|SA79(7):49-51
• Control Systems (SB)|SA93(9):82-86
• Costs, Keep Down (SB)|SA91(9):29
• Cowl Flap Actuator,Automatic (SB)|SA77(9):56
• Cowling Installation (DC)|SA74(2):51
• Cowling Installation (SB)|SA86(5):23
• Cowling Installation Notes (SB)|SA96(10):86-90
• Dacron (DC)|SA72(7):37
• Deburring Practices (SB)|SA93(1):67-68|(il)
• Drag Reduction(SB)|SA92(9):72-76
• Drill Usage (SB)|SA95(2):60-65
• Drilling Gear Legs (SB)|SA90(3):29-30
• Drilling Holes (SB)|SA89(4):28
• Drills Drilling (SB)|SA94(4):94-98
• Drills and Bits (SB)|SA93(2):65
• Drooped Snoot Leading Edge (SB)|SA77(2):23
• Electrical Bonding (SB)|SA84(8):20
• Electrical Grounding (SB)|SA94(5):88-90
• Electrical System (SB)|SA90(4):37-41
• Electrical System (SB)|SA90(5):29-32
• Electrical System 12 vs 24 volts (SB)|SA89(12):37
• Electrical System [3] Wing Tips (SB)|SA90(6):33-37
• Electrical Systems (Pt 1)(SB)|SA77(5):29
• Electrical Systems (Pt 2)(SB)|SA77(6):27
• Electrical Wiring Details (SB)|SA84(9):27
• Engine Baffles (DC)|SA73(10):14
• Engine Compartment Heat [Oil Cooler](SB)|SA84(12):12
• Engine Compartment Notes (SB)|SA91(8):54-58
• Engine Compartment Notes (SB)|SA96(11):77-82
• Engine Compartment Tips (SB)|SA90(12):29-32
• Engine Cooling (SB)|SA93(8):38-42|Cowl Ref
• Engine Hook-Up (SB)|SA89(8):27
• Engine Installation (SB)|SA89(7):27
• Engine Preparations (SB)|SA95(9):81-86
• Engine Selection (SB)|SA90(1):29-32
• Engine Selection (SB)|SA91(4):65-68
• Engine Stand (SB)|SA78(11):40
• Engines for Pushers (SB)|SA76(7):20
• Exhaust Stack Painting (SB)|SA89(11):40
• Exhaust Systems/Construction (Pt 3)(DC)|SA74(9):47
• Exhaust Systems/Mufflers,heat muffs,diagrams (Pt 4)(DC)|SA74(10):27-30
• Exhaust Systems/Planning (Pt 1)(DC)|SA74(7):31
• Exhaust Systems/Weldments (Pt 2)(DC)|SA74(8):50
• Exhaust Sytem(SB)|SA92(12):82-86
• FAA Inspections (DC)|SA74(4):52
• Fairing Strips/Construction methods (SB)|SA75(12):60-62
• Falco Getting Started (SB)|SA80(7):16
• Falco Progress Report (Pt.1)(SB)|SA80(6):20
• Falco Progress Report (Pt.4)(SB)|SA83(1):37
• Falco Progress Report (Pt.5)(SB)|SA84(4):15
• Falco Progress Report (Pt2)(SB)|SA81(5):12
• Falco Report (Pt.3)(SB)|SA82(2):52
• Fiber-glass Fairings (SB)|SA78(6):19
• Fiber-glass/Getting acquainted with material,process (DC)|SA73(4):42-44,
• Fiber-glass/Lightweight cloth for application over plywood (DC)|SA72(8):32
• Fiberglass Cowlings (Pt.1)(SB)|SA86(3):24
• Fiberglass Cowlings (Pt.2)(SB)|SA86(4):23
• Fiberglass Cowlings (SB)|SA91(11):84
• Fiberglass Cowlings (SB)|SA91(12):82
• Firewall, Stainless Steel (SB)|SA90(3):29-32
• Fittings (Pt.1)(SB)|SA80(9):12
• Fittings (Pt.2)(SB)|SA80(10):12
• Fittings (Pt.3)(SB)|SA80(11):16
• Flaco Flies(SB)|SA86(1):51
• Flight Testing (Pt.1)(SB)|SA89(1):27
• Flight Testing (Pt.2)(SB)|SA89(2):27
• Flight Testing (Pt.3)(SB)|SA89(3):28
• Flight Testing [First test flight](SB)|SA88(4):27
• Flush Riveting (SB)|SA87(4):34
• For easier Metal Work (SB)|SA91(6):36-39
• Fuel Gage (DC)|SA73(12):26
• Fuel Pump System (SB)|SA87(8):36
• Fuel Pump System (SB)|SA92(4):72-76
• Fuel Related Problems (SB)|SA94(6):69-73|
• Fuel System Management (SB)|SA79(10):24
• Fuel System Review (SB)|SA93(6):72-76
• Fuel System, Gravity Flow (DC)|SA73(3):16
• Fuel Tank Components (Pt1)(SB)|SA82(8):23
• Fuel Tank Components (Pt2)(SB)|SA82(9):21
• Fuel Tank, Aluminum (SB)|SA86(12):33
• Fuel Tanks, Aluminum (SB)|SA88(6):27
• Fuel Tanks, Fiberglass (Pt.3)(SB)|SA82(10):91
• Fuel Tanks, Fiberglass (Pt.4)(SB)|SA82(11):61
• Fuel Tanks, Fiberglass (Pt.5)(SB)|SA82(12):38
• Gelled Electrolyte Battery (SB)|SA92(1):45-58
• Getting Ready to Build(SB)|SA80(8):31
• Grommet Shields (Firewall)(SB)|SA89(5):36
• Gyro Instrument Systems (SB)|SA84(6):27
• Hangaring (SB)|SA83(10):52
• Hangaring (SB)|SA83(11):42
• Hangaring (SB)|SA83(12):22
• Hardware (SB)|SA85(6):22
• Heat Treatment (SB)|SA78(5):16
• Hinges, Piano (SB)|SA85(5):16
• Hole Drilling (DC)|SA72(11):52
• Homebuilt Certification (SB)|SA83(4):39
• Homebuilt Certification (SB)|SA83(5):24
• Homebuilt Recertification/Annual process|SA75(9):23-25
• Homebuilts, Most Popular (SB)|SA81(7):12|(US Census 1979)
• Homebuilts, Older (Pt.1)(SB)|SA82(5):54
• Homebuilts, Older (Pt.2)(SB)|SA82(6):14
• Homebuilts, Sale, Purchase [Forms (SB)|SA84(11):36
• Hoses, Flexible (SB)|SA82(7):14
• IFR Certification (DC)|SA75(7):17
• If You Fly In (SB)|SA93(7):82
• If You Fly In (SB)|SA93(7):82-86
• Ignition Switches (SB)|SA80(4):55
• Inlets, Submerged (NACA Ducts)(SB)|SA81(12):38
• Inspection Access (SB)|SA76(8):24
• Inspection and Acess Plates (TB)|SA73(8):56-57
• Installing A Canopy Window,Why and How (SB)|SA95(7):74-79
• Installing New Lycoming (Pt.1)(SB)|SA92(2):77-82
• Installing New Lycoming (Pt.2)(SB)|SA92(3):84-88
• Instrument Panel Planning (SB)|SA88(5):27
• Instrument Panel Preparation (SB)|SA84(5):18
• Instrument Panels (SB)|SA81(8):11
• Instrument Panels (SB)|SA92(11):85-90
• Instrumentation For VFR Homebuilt(DC)|SA75(3):59
• Interiors (Pt.1)(SB)|SA85(1):49
• Interiors (Pt.2)(SB)|SA85(2):26
• Interiors (Pt.3)(SB)|SA85(3):18
• Interiors (Pt.4)(SB)|SA85(4):23
• Jacking Aircarft (SB)|SA94(11):74-79
• Jacks(SB)|SA83(3):23
• Jigs (SB)|SA78(12):
• Joints in Aircraft Woodwork (SB)|SA91(10):78
• Kits (SB)|SA87(3):33
• Landing Gear Alignment (DC)|SA74(6):54
• Landing Gear Notes (SB)|SA91(2):42
• Landing Gear Problems,Solutions (Pt 1)(SB)|SA79(3):52
• Landing Gear Retraction Details (SB)|SA80(3):40
• Landing Gear Shock Absorbers (Pt 2)(SB)|SA79(4):57
• Landing Gear, Retractable (SB)|SA80(2):22
• Landing Gear, Spring Steel (SB)|SA79(5):15
• Landing/Taxi Lights (SB)|SA84(10):29
• Large Holes in Sheet Metal(SB)|SA93(2):67-69
• Large Radio Stack Openings (SB)|SA90(3):29
• Lighening Holes (SB)|SA93(1):69
• Lycoming Engines (SB)|SA81(6):38
• Magnetos (SB)|SA76(2):20
• Making Your Instrument Panel (SB)|SA96(7):74-79
• Mass Balance Control Surfaces (SB)|SA79(8):32
• Measureing Tips (SB)|SA86(7):27
• Metal Fairings (SB)|SA78(8):56
• Metal Spar Construction(SB)|SA93(5):66-71
• Metal Tips (SB)|SA89(6):30
• Metal Work (TB)|SA72(1):14
• Metal Working Tips (2)(SB)|SA93(2):65
• Metal Working Tips(1)(SB)|SA93(1):66-70
• Modificatins Good/Bad? (SB)|SA95(12):76-81
• Modus Operandi-Personal aircraft procedures (SB)|SA96(6):78-81
• Mufflers/Drawings (DC)|SA75(6):38-39
• NACA Ducts/Inlets (SB)|SA76(6):26-28
• Nailing How To Basics (DC)|SA72(12):36-39
• Night Flying (SB)|SA93(12):81
• Night Flying/Light systems,landing,instrument,anti-collision (SB)|SA77(12):12-15
• Nut Plates (DC)|SA73(6):56
• Nuts Bolts/Identification,selection,usage tips,drawings (SB)|SA79(11):14
• Paint Preparation (SB)|SA76(11):12
• Painting Homebuilts/General guidelines,problems,equipment (SB)|SA77(1):19-21
• Painting Preparation (Pt.2)(SB)|SA85(8):24
• Painting Preparation (Pt.3)(SB)|SA85(9):30
• Painting Preparation (SB)|SA85(7):16
• Painting Wings (SB)|SA92(7):76-79
• Painting Your Homebuilt (Pt2)(SB)|SA95(1):68-73
• Painting a Metal Homebuilt (Pt 1-Preparation)(SB)|SA90(9):29-32
• Painting a Metal Homebuilt (Pt 2)(SB)|SA90(10):37-40
• Painting a Metal Homebuilt (Pt 3)(SB)|SA90(11):33-36,75
• Painting your Homebuilt (Pt1)(SB)|SA94(12):74-79
• Pazmany Builders Network/Newsletter,H.Sponangle,problem solving (DC)|SA71(6):27
• Pitot Static Systems(SB)|SA88(8):27
• Pitot to Panel/Designing an instrument panel (DC)|SA75(4):31-34
• Pitot-Static System (SB)|SA82(1):42
• Plexiglas, Stretch Forming (SB)|SA88(3):32
• Plywood (SB)|SA78(9):34
• Plywood Skinning (Pt.1)(SB)|SA87(5):28
• Plywood Skinning (Pt.2)(SB)|SA87(6):29
• Propeller Sizing (DC)|SA73(2):35
• Propellers, Fixed Pitch (SB)|SA86(8):28
• Push-Pull Controls/Drawings (DC)|SA72(4):27-28
• Push-Pull Tube Controls (SB)|SA81(11):35
• RV-6 Assembly Notes (SB)|SA90(3):33
• Radio Noise (SB)|SA95(4):73-77
• Recreational License (TB)|SA95(9):2
• Rigging Trimming (Pt1)(SB)|SA94(7):111-116
• Rigging/Trimming (Pt2)(SB)|SA94(8):98-104
• Rigicell/Aluminum construction,fiberglas fuel tanks (DC)|SA72(10):51-54
• Rivet Gun Notes(SB)|SA88(1):31
• Riveting/Skinning Tips (SB)|SA87(7):39
• Rudder Cable Fairings (SB)|SA89(11):37
• Rust Protection (SB)|SA95(10):86-91
• Safety Inspections (DC)|SA73(11):35
• Safety Wiring (SB)|SA94(9):76-80
• Sanding, Abrading (SB)|SA89(10):34
• Seat Mechanisms, Sliding (SB)|SA83(7):56
• Setting Up Shop (SB)|SA90(7):32-36
• Shoulder Harnesses (DC)|SA74(1):59
• Sliding Canopies, Doors, Latches (Pt 1)(DC)|SA74(12):17
• Sliding Canopies, Doors, Latches (Pt 2)(DC)|SA75(1):55
• Sliding Canopies, Doors, Latches (Pt 3)(DC)|SA75(2):32
• Spark Plugs (SB)|SA95(5):68-72
• Spars, One-Piece Box (SB)|SA80(12):10
• Spars, One-Piece Box (SB)|SA81(1):34
• Special Tools Cache (SB)|SA96(4):74-77
• Spinner Installation (SB)|SA93(10):78
• Spinner Safety(SB)|SA87(2):27
• Spinners (SB)|SA76(1):57
• Spoilers for Roll Control,Homebuilts (SB)|SA77(10):28-31
• Stall Spin Safety (SB)|SA81(4):47
• Stall Warning Devices (SB)|SA83(9):20
• Stick-On Trim(SB)|SA86(2):54
• Surplus/Salvage Parts (SB)|SA87(9):29
• Swedish Motorsailers,Government Regulation,Exhaust Systems (DC)|SA75(5):60
• Swinging the Compass (SB)|SA96(3):72-77
• Switches (Pt.1)(SB)|SA85(10):23
• Switches (Pt.2)(SB)|SA85(11):54
• Switches (Pt.3)(SB)|SA85(12):57
• Tail Wheel Installation (SB)|SA79(6):15
• Tandem Two-Place Design (DC)|SA70(5):27-28|ALSTON|
• Taps and Dies (DC)|SA72(5):26
• Tips on Glue (TB)|SA72(3):12
• Tire Care (SB)|SA95(11):80-85
• To Build Or Not To Build(SB)|SA93(3):27-31
• Trim Tabs (SB)|SA76(3):19
• Tube Bending (SB)|SA83(8):48
• Tubing End Flattening (SB)|SA84(10):76
• Turner T-40 (Pt.2)(SB)|SA77(3):26
• Turner T-40 (Pt.3)(SB)|SA77(4):26
• VW Engine Hints (DC)|SA73(7):43
• VW Engine Users (SB)|SA78(7):15
• VW Engines (Pt.1)(SB)|SA78(3):17
• VW Engines (Pt.2)(SB)|SA78(4):19
• Ventilation Options (SB)|SA94(1):72-77
• Ventilation System (SB)|SA91(3):41-45
• Washers/Rubber/Fiber Construction (SB)|SA88(8):28
• Weatherstripping (SB)|SA87(11):27
• Weighing Homebuilts (SB)|SA91(7):80-84
• Weight & Balance (SB)|SA78(1):17
• Weight Control (SB)|SA78(2):13
• Welded Steel Tube Structures (SB)|SA80(1):56
• What to Build (SB)|SA93(4):69
• What to Build/Choosing a homebuilt project (DC)|SA73(9):57-58
• Wheel Pants (SB)|SA79(12):24
• Wheel Pants/How to install (DC)|SA75(8):52-53|(diagrams)
• Windshield Covers (SB)|SA79(2):64
• Windshield Trim Work (SB)|SA92(5):70
• Windshild Fitting(SB)|SA84(1):57
• Wing Flap Mechanisms (Pt.1)(SB)|SA82(3):26
• Wing Flaps (Pt.2)(SB)|SA82(4):33
• Wing Modifications (Pt2)(SB)|SA81(3):19
• Wing Modifications (SB)|SA81(2):35
• Wing Plan Geometry (Slats)(SB)|SA81(9):55
• Wing Rib Construction (SB)|SA76(9):19
• Wing Ribs - Metal (SB)|SA76(10):24
• Wing Stand, Mobile (SB)|SA87(12):27
• Wing Tip Design (SB)|SA88(12):27
• Wire Installation (SB)|SA84(7):42
• Wiring Practices (SB)|SA88(7):27
• Wood Aircraft (SB)|SA91(5):71-75
• Wood Propeller for Your Homebuilt (SB)|SA91(1):71-74
• Wood Propellers (DC)|SA74(11):18
• Wood Wing Ribs (SB)|SA94(2):79-83
• Wood Wings-Construction (SB)|SA96(1):75-80
• Wood, Laminating, Bending (SB)|SA86(6):28
• Working with Acrylics,Plexiglas (DC)|SA72(9):18
• Workshop Clutter (DC)|SA74(5):54
• Workshop Tips (SB)|SA95(6):69-75