Fiberglass Techniques for RV Aircraft
Please Select a Location & Date:
Workshop Status:
Available
Address:
VU Aviation Technology Center
2175 S Hoffman Rd.
Indianapolis, IN 46241
Date:
October 26 - October 27, 2024
Price:
$359.00
Course length: 2 days

This course will provide training in composite techniques required for completion of non-composite aircraft kits such as the Van’s RV series of aircraft and others. Projects are designed to showcase and develop skills required to finish the ever growing number of composite parts supplied by kit manufacturers. By the end of the course the student will have confidence in working with composites and develop skills for creating numerous fairings and making repairs to composite molded parts. Techniques and products used for filling/sanding will be demonstrated and practiced. This course will save hours of guessing and frustration when you learn how to do it right. Although the course is tailored to RV builders, builders of other non-composite aircraft such as the, Zenith and Sonex will benefit from this course.

MINIMUM AGE
The minimum age to participate in a SportAir Workshop is 18. The SportAir workshops are structured as an adult educational activity. Youth are encouraged to participate in our AeroEducate programs at www.aeroeducate.org

I would like to bring my spouse or building partner. Is that possible?
Yes, we encourage family and friends participation. Minimum age to participate is 18. Each person attending the course with you must be a registered and paid participant. There are limited seats in each course and each participant must be enrolled at the current course fee. There have been questions in the past about bringing along a spouse, family member, or friend to observe or audit the course with you. We’ve found over the many years we have presented these courses that unpaid observers quickly become hands on participants, which is unfair to other paid participants of the course, which is why we require all to be enrolled. If you have a specific question about this policy, please feel free to email us at sportair@eaa.org

Do I need to be an EAA member to attend?
No, the workshops are open to anyone interested in learning the skills necessary to build their own aircraft.

Can I take more than one workshop at a location on one weekend?
You are only able to take one workshop each weekend. Each workshop is a full two days in length.

When I complete a course will I be able to do all the related work on my project unassisted?
Since each workshop is only two days in length, it is impossible to teach you everything you need to know. We do tell you where to get further assistance and we certainly provide you with the confidence necessary to begin your project. The fundamentals are taught and you will need to go home and practice.

How much time is actually spent doing "hands-on" activities?
The majority of the workshop time is spent doing "hands-on" activities. Be sure to wear your work clothes. In most courses, about 25% of the total time will be spent in lecture and discussion.

What are the hours of the workshops?
Registration for the workshop begins promptly at 7:30 a.m. on day one with the workshops beginning promptly at 8 a.m. Day One activities conclude about 5 p.m. Day two is 8 a.m. to 3:30 p.m, but we’ve been known to continue until 5pm as needed on Day two.

Do I need to bring any tools with me?
No, all tools and materials are provided.

Can I purchase materials at the workshops?
No, however you will receive a discount sheet from Aircraft Spruce & Specialty that will allow you to order materials at a discount with complimentary shipping.

Will I have time for lunch?
Yes, 1 hour is scheduled for lunch each day.

How many people will be in each class?
We try to limit class size to an instructor/student ratio of no more than 16 students per instructor. The welding classes are limited to 12 students due to tooling requirements.

How can I find out what hotels are available in the area?
The best source is Google Maps, Expedia or other travel site. They have the most up to date information and special pricing

Can I pay for the workshop the day I arrive?
No. We must receive payment prior to the workshop. In the past we have experienced a number of "no-shows" from people who have not prepaid. If you need to cancel, a full refund will be provided as long as you notify us at least seven calendar days prior to the workshop.

What if I have to cancel my enrollment?
A full refund will be provided as long as you notify us seven calendar days or more prior to the workshop. These workshops are specialized courses with limited attendance to enhance your learning experience. If you cancel within seven calendar days of the workshop a $100 cancellation fee will be assessed. A “no show” will not be entitled to a refund.

How will I know where the workshop is located?
Workshop addresses and map locations can be found in our information packets. In addition, we will have signs directing you to the workshop.

Do I take anything home with me?
All courses provide you with a detailed workbook and a certificate of completion. In several courses you will build a small project to take with you.

Do I receive a workbook?
Yes, a workbook is provided for each workshop.

Are the instructors volunteers or professionals?
All of our instructors have high qualifications. They are professionals in their field and have years of experience.

What if I am undecided about building an airplane?
We recommend that you take the Fundamentals of Aircraft Building workshop. This workshop will give you "hands-on" experience in all types of aircraft construction.

Can I get credit for IA renewal by attending your workshop?
Several FAA district offices have given credit for the workshop. It depends upon the local FSDO.

Will I learn to weld aluminum in the gas welding class?
Because of the complexities we do not demonstrate aluminum welding.

Can I bring my own welding torch?
Yes, we encourage you to do this.

What type of covering system is used in the fabric covering class?
The Poly-Fiber system is used. However, nitrate and butyrate dope is also discussed.

How much time will be spent vacuum bagging in the composite class?
A very limited time is spent on vacuum bagging. The technique is demonstrated and is enough to familiarize you with the procedure.

Do you teach us how to finish a composite airplane?
Yes, we discuss all aspects of composite finishing.

What spraying system is used in the fabric workshop?
Depending on the facility, we may spray some of the fabric coatings. If this is not possible, spraying technique will be covered. We use primarily the HLVP systems.

May I bring my own project to the class to work on?
We do not encourage people to bring their own project. We have a set curriculum that includes a project that we have designed. If we had separate items to work with it would only create confusion for the rest of the class.

Does the electrical course teach me how to install avionics and antennas?
Yes, in addition to basic wiring of the electrical systems.

I’m designing my own aircraft, do any of the workshops cover basic design issues?
No, structural design will not be covered in any of the workshops.

Why do you not have the workshops in more locations?
The EAA SportAir Workshops are presented as a self sustaining program of the EAA. It is very difficult to find suitable locations. We ship everything we need for the classes in large wooden crates. It is very expensive for us to travel. We try to schedule classes only where we can be assured of a large attendance.

I would like to host a SportAir Workshop. What are the requirements?
Finding new facilities are the biggest challenge for this program. EAA is a non-profit organization and the SportAir Workshops are presented as a self sustaining program. It is very expensive for us to take this program on the road. We try to schedule classes only where we can be assured of an attendance cover operational costs.

Minimum facility requirements are as follows:

  • Location must be in or close to a sizable metro area
  • Forklift rated at 1,000 pounds for loading/unloading large crates
  • Enough space to hold at least 4 workshops with 16 students simultaneously
  • Adequate lighting
  • Bathroom facilities
  • Willingness to help grow grassroots aviation

If this sounds like something you could host, we would love to hear from you at sportair@eaa.org or 1-800-967-5746.

★ ★ ★ ★ ★
"I feel a lot more confident about doing my layup. Might be good to add a couple orbital sanders. Add a few actual Van’s parts for demo purposes. I would recommend the class to other RV builders.”
— Carl H.

★ ★ ★ ★ ★
"Instructor had excellent subject matter knowledge...Would definitely refer other RV builders. Hands-on is best experience."
— Mike C.

★ ★ ★ ★ ★
"It was taught well and everything was hands-on at your own pace. Yes, I would refer other RV builders."
— Shane C.

★ ★ ★ ★ ★
"The process works and it is a big help to use it prior to breaking real aircraft parts.”
— Jay J.

★ ★ ★ ★ ★
"Great confidence-building workshop. The windscreen to fuselage fixture was great. I would recommend this course to another RV builder."
— John T.

★ ★ ★ ★ ★
"I would refer some to take this class. Thanks for the great tips."

★ ★ ★ ★ ★
"This class was really pertinent. Would like to see in notebook recommendations for all of the RV scenarios, even one not done in class. Also, a bit of detail in windscreen steps for class and real RV. Otherwise great class. Pace was fine. Would you refer another RV builder? YES!!!”
General Overview
  • Materials (Resin, Reinforcement, Cores, Fillers)
  • Tools & Workshop supplies
  • Process, wet layup, pre-preg, curing techniques
Project 1: Gear Leg Fairing, Part 1
  • Overview
  • Demo
  • Clay Mold, Prep, Layup

---MID-DAY BREAK---

Project 2: Windshield to Fuselage Fairing, Part 1
  • Overview
  • Demo
  • Layout, Prep Plexi and Aluminum
  • Filler
  • Prep-Preg technique, Lay up #1
Project 3: Repair Damaged Wheel pant, Part 1
  • Overview
  • Demo
  • Trim bad section
  • Prep for bonding
  • Create Backing
  • Pre-Preg a patch and apply
  • Apply Peel-ply strips
Project 1: Gear Leg Fairing, Part 2
  • Remove part from mold
  • Trim, Sand
  • Apply Filler

---END OF DAY 1---

DAY 2 Project 2: Windshield to Fuselage Fairing, Part 2
  • Demo
  • Sand fiberglass, re-mask
  • Apply 2 coat of filler
Project 3: Repair Damaged Wheel pant, Part 2
  • Demo
  • Remove Peel-ply, Sand
  • Fill
Project 1: Gear Leg Fairing, Part 3
  • Sand Filler
  • Apply Glaze filler
  • Sand
  • Paint with Primer
Project 2: Windshield to Fuselage Fairing, Part 3
  • Sand
  • Apply Glaze filler
  • Sand smooth
  • Paint w/Primer if possible
Project 3: Repair Damaged Wheel pant, Part 3
  • Sand
  • Apply Glaze filler
  • Sand smooth
  • Paint if w/Primer if possible

Course Recap

Evaluations & Certificates

The course is centered on the following three projects:

  • Project 1: Gear Leg to fuselage fairing
  • Project 2: Windshield to Fuselage Fairing
  • Project 3: Repair Damaged Wheel pant

Scott Vanderveen Scott Vanderveen is the owner of Pro-Composites, Inc, Scott provides builder support and plans for the Vision Aircraft. Scott was also been an instructor in the EAA SportAir Workshops series since 2009.

VANS RV GALLERY