Join us on January 26-30, 2026, during the sixth-annual EAA Homebuilders Week online event. Experts from every corner of the homebuilt aircraft community will bring their knowledge and information to builders everywhere through free and interactive webinars.
Homebuilders Week is a tremendous learning opportunity that celebrates the legacy of EAA founder Paul Poberezny. As he often said, using hand and mind to create aircraft that allow us to enjoy the personal freedom of flight!
January 26, 2026
Building an Aircraft — What You Need to Know
11:30 a.m.
This presentation will go beyond the actual building process to educate you on the FAA rules that apply to building your own aircraft, as well as insurance, liability, the repairman certificate, and much more. Join EAA Homebuilt Community Manager Charlie Becker to learn the things every builder should know about building their own aircraft.
Composite Construction Basics
1 p.m.
Learn the basics of how to work with composites in aircraft construction projects. EAA SportAir workshop instructor Scott Vanderveen will share what you need to know to be successful. Qualifies for FAA WINGS and AMT credit.
EAA Advocacy Update: Top Homebuilding Issues and MOSAIC, BVLOS, 100LL
2:30 p.m.
Join EAA’s Jack Pelton, Sean Elliott and Rob Hackman as they discuss current issues for owners and builders of amateur-built aircraft. In addition, they will cover MOSAIC/Sport Pilot 2.0, Beyond Visual Line of Sight (BVLOS) proposed new rules for Unmanned Aircraft Systems, 100LL fuel replacement, and other challenges to the aviation industry.
Getting Your Project Finished and Flying
4 p.m.
Serial builder Vic Syracuse will share strategies and tips for successfully completing your project. Vic is a nationally recognized expert in pre-buy examinations, condition inspections, and DAR services for amateur-built aircraft. He is author of the Pre-Buy Guide for Amateur-Built Aircraft, Are Your Nuts Tight Guide to Identifying Problems on Your Amateur-Built Aircraft & The Maintenance Handbook for Van’s RV Aircraft.
Panel Planning and Wiring
5:30 p.m.
This presentation is for builders who want to know how to plan and wire their aircraft. Marc Ausman, author of Aircraft Wiring Guide, will cover how to start thinking about and planning for the electrical system. Qualifies for FAA WINGS and AMT credit.
Van's Aircraft RV-15 Update
7 p.m.
Rian Johnson and Marc Cook from Van's Aircraft will review everything about the RV-15, the company's newest total performance aircraft. Designed as a STOL-capable, backcountry aircraft the RV way, with exceptional handling and cruise capability. They will update us on the status of kit production, shipping timelines, and a detailed discussion of the technical aspects of the RV-15.
January 27, 2026
Wiring Basics
11:30 a.m.
EAA SportAir Workshops Electrical Systems & Avionics instructor Dick Koehler discusses the basics of aircraft electrical wiring and tips for planning out your aircraft electrical system. Qualifies for FAA WINGS and AMT credit.
Fabric Covering Basics
1 p.m.
Learn the basics of fabric covering aircraft from EAA SportAir Workshop instructor Austin Jones, who is a technical specialist with Consolidated Aircraft Coatings in Riverside, CA. Austin will explain the Poly Fiber covering process and products. This is great information for anyone doing a new covering job or repairing an existing Poly Fiber covering process. Qualifies for FAA WINGS and AMT credit.
Sheet Metal Basics
2:30 p.m.
Sheet metal construction is the most popular material used in today’s kit aircraft. Mike Dooley will teach you how to work with sheet metal in this session. Mike is an instructor for the EAA SportAir Workshops sheet metal course and built an RV-8. Qualifies for FAA WINGS and AMT credit.
Dynon Avionics
4 p.m.
After hundreds to thousands of hours working on your airframe, it's time to decide how to equip your panel. In this webinar, we'll cover general considerations such as matching your avionics to your flying and budget, product choices, and configurations from Dynon Avionics.
Painting Your Plane: DIY or Use an Expert?
5:30 p.m.
The design and quality of your paint job will be the most visible representation of your build. In this forum, Craig Barnett, CEO of Scheme Designers, will cover the elements and concepts of a great paint scheme design, and its impact on cost and ease of application to your aircraft. Ken Reese, owner of KD Aviation, will discuss tips to prepare your aircraft for paint, layout, painting, and detailing to arrive at the best possible outcome. Qualifies for FAA WINGS and AMT credit.
Propeller Selection for Homebuilts
7 p.m.
Steve Boser from Sensenich Propeller will discuss how to choose the right propeller for your experimental aircraft. He will explain the black art of propeller design and how to make good choices for your homebuilt. Qualifies for FAA WINGS and AMT credit.
January 28, 2026
Flight Testing 101
11:30 a.m.
Paul Dye presents a look at the things a builder/pilot should consider in planning, training for, and executing a flight test program on their new homebuilt aircraft. This presentation looks at the goals and methods of flight testing, and how to manage potential risks to both pilots and the aircraft so that Phase 1 flight testing goes smoothly and productively. Qualifies for FAA WINGS credit.
TIG Welding
1 p.m.
The ability to make aircraft-quality welds opens up many aircraft designs for the homebuilder. TIG (Tungsten Inert Gas) welding is ideal for building aircraft-quality parts. EAA Homebuilt Community Manager Charlie Becker and Shaun Walker, EAA’s SportAir TIG welding instructor, will cover the basics getting started in TIG welding 4130 chromoly tubing. Qualifies for FAA WINGS and AMT credit.
Hardware for Homebuilts
2:30 p.m.
When starting to build, the homebuilder will need to learn the basics of AN hardware and many other aviation specific fasteners. In this webinar, Dick Koehler will explain how to properly use AN hardware and many other fasteners not commonly used outside of aircraft. Qualifies for FAA WINGS and AMT credit.
Advanced Flight Systems
4 p.m.
Rob Hickman from Advanced Flight Systems will discuss additional ways you can reduce your instrument panel installation time with an ADVANCEDPANEL.
Condition Inspections: Who and How
5:30 p.m.
Join Brian Carpenter from Rainbow Aviation Services, providers of light-sport repairman training, as he discusses who can perform maintenance, repairs, major changes, and annual condition inspections for experimental amateur-built aircraft. In addition, Brian will cover how to conduct the annual condition inspection. Qualifies for FAA WINGS and AMT credit.
Lessons From 200,000 Borescope Images
7 p.m.
The borescope is the gold standard for assessing cylinder condition. Savvy Aviation's Mike Busch A&P/IA demonstrates how to perform a proper cylinder borescope inspection. He discusses what to look for in borescope images, and offers analytical data obtained from the 200,000 borescope images that have been uploaded to Savvy's platform in the past two years. Qualifies for FAA WINGS and AMT credit.
January 29, 2026
Amateur-Built Aircraft Certification Process
11:30 a.m.
Before you can fly your homebuilt aircraft, you need to complete both the FAA registration and certification process. Join FAA Designated Airworthiness Representative Joe Norris as he explains what a builder needs to do to successfully navigate the FAA’s required processes.
Insuring Your Homebuilt
1 p.m.
In this webinar, Jim Stewart of Acrisure Aerospace discusses his most frequently asked questions that come up during AirVenture and other aviation events regarding insuring a homebuilt aircraft.
Sonex Aircraft Update
2:30 p.m.
Get an overview of all Sonex products, including the new Highwing! Sonex offers basic, economical, easy-to-build aircraft. Single and two-place aircraft are available. Two models, the Sonex and Sonerai, are available as plansbuilt aircraft. Sonex even offers single-place and two-place jet aircraft. All designs are fully aerobatic when flown as single-place aircraft.
Garmin Experimental Avionics Solutions
4 p.m.
A complete overview of the many offerings from Garmin for your experimental and light-sport aircraft. Topics covered by Brad Brensing, Garmin Experimental/LSA Sales Manager, will include screen selection, panel and remote mount avionics options, interface capabilities, and additional resources to help you in your homebuilt project planning journey!
Buying a Used Homebuilt
5:30 p.m.
Experimental Amateur Built aircraft, aka homebuilts, are increasingly popular for non-builders to purchase finished and flying. Vic Syracuse will share with you the things you need to know before buying a finished and flying homebuilt. Vic is a nationally recognized expert in pre-buy examinations, condition inspections, and DAR services for amateur-built aircraft. He is author of the Pre-Buy Guide for Amateur-Built Aircraft & Maintenance Handbook for Van’s RV Aircraft. Qualifies for FAA WINGS and AMT credit.
Lycoming Engine Installation
7 p.m.
Judson Rupert principal engineer, piston engineering for Lycoming Engines, will cover the things to consider when installing a Lycoming engine on your homebuilt. Judson is an experienced aircraft owner and A&P mechanic. Qualifies for FAA WINGS and AMT credit.
January 30, 2026
Staying Alive — Analysis of Homebuilt Fatal Accidents
11:30 a.m.
The EAA Homebuilt Aircraft Council provides an analysis of fatalities in experimental amateur built aircraft over the past 13+ years to identify common causes and elements of training or technology which could help reduce the chances of being involved in an accident. Qualifies for FAA WINGS credit.
Fly the Wing: AOA Demystified — Your Wing’s Real-Time Safety Gauge
1 p.m.
This presentation cuts through the mystery to flying with AOA. Michael Vaccaro will explain what AOA actually measures, why it’s more dependable than airspeed, and how it instantly shows whether you’re in the proper energy state for approach, maneuvering, or pattern work. You’ll learn how “on-speed” AOA keeps you in the ideal energy window, preventing a negative energy state when you’re too slow (stall risk) and avoiding excess energy when you’re too fast for landing. Most importantly, you’ll see how AOA gives you immediate situational awareness, allowing you to correct a bad trend long before it becomes a loss-of-control event. By the end of this webinar, you’ll walk away with simple, practical techniques you can apply on your very next flight, to dramatically improve stick-and-rudder precision, landing consistency, and overall safety. Qualifies for FAA WINGS credit.
Zenith Aircraft Kits & Plans
2:30 p.m.
Zenith Aircraft offers both high-wing and low-wing kits that are fun to fly and easy to build. They also offer plans for those on a tight budget. In this session, Sebastien Heintz and Roger Dubbert of Zenith Aircraft will discuss their designs and engine options to help you decide if this is the kit to build.
Weight and Balance
4 p.m.
Joe Norris, amateur built DAR, will cover the basics of how to perform a weight and balance calculation on your aircraft. He will then explain what calculations and paperwork the FAA inspector or DAR needs for your airworthiness application. Qualifies for FAA WINGS credit.
Can Homebuilt Accident Rates Be Fairly Compared?
5:30 p.m.
Ron Wanttaja will use 26 years of NTSB data to compare the accident rates of common homebuilt types. The math is easy enough, but the problem lies in doing it fairly. For instance, the additional hazards related to water operations may cause more accidents, but it’s not really the fault of the aircraft itself. Similarly, a higher rate for a design that appeals to less-experienced pilots may not be due to the aircraft itself. Ron will discuss these and other factors as he presents a head-to-head comparison of homebuilt accident rates.
Common Builder and Maintenance Errors
7 p.m.
Vic Syracuse will discuss the errors he sees repeatedly on pre-buy and DAR inspections. Vic is a nationally recognized expert in pre-buy examinations, condition inspections, and DAR services for amateur-built aircraft. He is author of Pre-Buy: Guide for Amateur-Built Aircraft, Are Your Nuts Tight: Guide to Identifying Problems on Your Amateur-Built Aircraft, and Maintenance Handbook for Van’s RV Aircraft. Qualifies for FAA WINGS and AMT credit.
January 26, 2026
Building an Aircraft — What You Need to Know
11:30 a.m.
This presentation will go beyond the actual building process to educate you on the FAA rules that apply to building your own aircraft, as well as insurance, liability, the repairman certificate, and much more. Join EAA Homebuilt Community Manager Charlie Becker to learn the things every builder should know about building their own aircraft.
Composite Construction Basics
1 p.m.
Learn the basics of how to work with composites in aircraft construction projects. EAA SportAir workshop instructor Scott Vanderveen will share what you need to know to be successful. Qualifies for FAA WINGS and AMT credit.
EAA Advocacy Update: Top Homebuilding Issues and MOSAIC, BVLOS, 100LL
2:30 p.m.
Join EAA’s Jack Pelton, Sean Elliott and Rob Hackman as they discuss current issues for owners and builders of amateur-built aircraft. In addition, they will cover MOSAIC/Sport Pilot 2.0, Beyond Visual Line of Sight (BVLOS) proposed new rules for Unmanned Aircraft Systems, 100LL fuel replacement, and other challenges to the aviation industry.
Getting Your Project Finished and Flying
4 p.m.
Serial builder Vic Syracuse will share strategies and tips for successfully completing your project. Vic is a nationally recognized expert in pre-buy examinations, condition inspections, and DAR services for amateur-built aircraft. He is author of the Pre-Buy Guide for Amateur-Built Aircraft, Are Your Nuts Tight Guide to Identifying Problems on Your Amateur-Built Aircraft & The Maintenance Handbook for Van’s RV Aircraft.
Panel Planning and Wiring
5:30 p.m.
This presentation is for builders who want to know how to plan and wire their aircraft. Marc Ausman, author of Aircraft Wiring Guide, will cover how to start thinking about and planning for the electrical system. Qualifies for FAA WINGS and AMT credit.
Van's Aircraft RV-15 Update
7 p.m.
Rian Johnson and Marc Cook from Van's Aircraft will review everything about the RV-15, the company's newest total performance aircraft. Designed as a STOL-capable, backcountry aircraft the RV way, with exceptional handling and cruise capability. They will update us on the status of kit production, shipping timelines, and a detailed discussion of the technical aspects of the RV-15.
January 27, 2026
Wiring Basics
11:30 a.m.
EAA SportAir Workshops Electrical Systems & Avionics instructor Dick Koehler discusses the basics of aircraft electrical wiring and tips for planning out your aircraft electrical system. Qualifies for FAA WINGS and AMT credit.
Fabric Covering Basics
1 p.m.
Learn the basics of fabric covering aircraft from EAA SportAir Workshop instructor Austin Jones, who is a technical specialist with Consolidated Aircraft Coatings in Riverside, CA. Austin will explain the Poly Fiber covering process and products. This is great information for anyone doing a new covering job or repairing an existing Poly Fiber covering process. Qualifies for FAA WINGS and AMT credit.
Sheet Metal Basics
2:30 p.m.
Sheet metal construction is the most popular material used in today’s kit aircraft. Mike Dooley will teach you how to work with sheet metal in this session. Mike is an instructor for the EAA SportAir Workshops sheet metal course and built an RV-8. Qualifies for FAA WINGS and AMT credit.
Dynon Avionics
4 p.m.
After hundreds to thousands of hours working on your airframe, it's time to decide how to equip your panel. In this webinar, we'll cover general considerations such as matching your avionics to your flying and budget, product choices, and configurations from Dynon Avionics.
Painting Your Plane: DIY or Use an Expert?
5:30 p.m.
The design and quality of your paint job will be the most visible representation of your build. In this forum, Craig Barnett, CEO of Scheme Designers, will cover the elements and concepts of a great paint scheme design, and its impact on cost and ease of application to your aircraft. Ken Reese, owner of KD Aviation, will discuss tips to prepare your aircraft for paint, layout, painting, and detailing to arrive at the best possible outcome. Qualifies for FAA WINGS and AMT credit.
Propeller Selection for Homebuilts
7 p.m.
Steve Boser from Sensenich Propeller will discuss how to choose the right propeller for your experimental aircraft. He will explain the black art of propeller design and how to make good choices for your homebuilt. Qualifies for FAA WINGS and AMT credit.
January 28, 2026
Flight Testing 101
11:30 a.m.
Paul Dye presents a look at the things a builder/pilot should consider in planning, training for, and executing a flight test program on their new homebuilt aircraft. This presentation looks at the goals and methods of flight testing, and how to manage potential risks to both pilots and the aircraft so that Phase 1 flight testing goes smoothly and productively. Qualifies for FAA WINGS credit.
TIG Welding
1 p.m.
The ability to make aircraft-quality welds opens up many aircraft designs for the homebuilder. TIG (Tungsten Inert Gas) welding is ideal for building aircraft-quality parts. EAA Homebuilt Community Manager Charlie Becker and Shaun Walker, EAA’s SportAir TIG welding instructor, will cover the basics getting started in TIG welding 4130 chromoly tubing. Qualifies for FAA WINGS and AMT credit.
Hardware for Homebuilts
2:30 p.m.
When starting to build, the homebuilder will need to learn the basics of AN hardware and many other aviation specific fasteners. In this webinar, Dick Koehler will explain how to properly use AN hardware and many other fasteners not commonly used outside of aircraft. Qualifies for FAA WINGS and AMT credit.
Advanced Flight Systems
4 p.m.
Rob Hickman from Advanced Flight Systems will discuss additional ways you can reduce your instrument panel installation time with an ADVANCEDPANEL.
Condition Inspections: Who and How
5:30 p.m.
Join Brian Carpenter from Rainbow Aviation Services, providers of light-sport repairman training, as he discusses who can perform maintenance, repairs, major changes, and annual condition inspections for experimental amateur-built aircraft. In addition, Brian will cover how to conduct the annual condition inspection. Qualifies for FAA WINGS and AMT credit.
Lessons From 200,000 Borescope Images
7 p.m.
The borescope is the gold standard for assessing cylinder condition. Savvy Aviation's Mike Busch A&P/IA demonstrates how to perform a proper cylinder borescope inspection. He discusses what to look for in borescope images, and offers analytical data obtained from the 200,000 borescope images that have been uploaded to Savvy's platform in the past two years. Qualifies for FAA WINGS and AMT credit.
January 29, 2026
Amateur-Built Aircraft Certification Process
11:30 a.m.
Before you can fly your homebuilt aircraft, you need to complete both the FAA registration and certification process. Join FAA Designated Airworthiness Representative Joe Norris as he explains what a builder needs to do to successfully navigate the FAA’s required processes.
Insuring Your Homebuilt
1 p.m.
In this webinar, Jim Stewart of Acrisure Aerospace discusses his most frequently asked questions that come up during AirVenture and other aviation events regarding insuring a homebuilt aircraft.
Sonex Aircraft Update
2:30 p.m.
Get an overview of all Sonex products, including the new Highwing! Sonex offers basic, economical, easy-to-build aircraft. Single and two-place aircraft are available. Two models, the Sonex and Sonerai, are available as plansbuilt aircraft. Sonex even offers single-place and two-place jet aircraft. All designs are fully aerobatic when flown as single-place aircraft.
Garmin Experimental Avionics Solutions
4 p.m.
A complete overview of the many offerings from Garmin for your experimental and light-sport aircraft. Topics covered by Brad Brensing, Garmin Experimental/LSA Sales Manager, will include screen selection, panel and remote mount avionics options, interface capabilities, and additional resources to help you in your homebuilt project planning journey!
Buying a Used Homebuilt
5:30 p.m.
Experimental Amateur Built aircraft, aka homebuilts, are increasingly popular for non-builders to purchase finished and flying. Vic Syracuse will share with you the things you need to know before buying a finished and flying homebuilt. Vic is a nationally recognized expert in pre-buy examinations, condition inspections, and DAR services for amateur-built aircraft. He is author of the Pre-Buy Guide for Amateur-Built Aircraft & Maintenance Handbook for Van’s RV Aircraft. Qualifies for FAA WINGS and AMT credit.
Lycoming Engine Installation
7 p.m.
Judson Rupert principal engineer, piston engineering for Lycoming Engines, will cover the things to consider when installing a Lycoming engine on your homebuilt. Judson is an experienced aircraft owner and A&P mechanic. Qualifies for FAA WINGS and AMT credit.
January 30, 2026
Staying Alive — Analysis of Homebuilt Fatal Accidents
11:30 a.m.
The EAA Homebuilt Aircraft Council provides an analysis of fatalities in experimental amateur built aircraft over the past 13+ years to identify common causes and elements of training or technology which could help reduce the chances of being involved in an accident. Qualifies for FAA WINGS credit.
Fly the Wing: AOA Demystified — Your Wing’s Real-Time Safety Gauge
1 p.m.
This presentation cuts through the mystery to flying with AOA. Michael Vaccaro will explain what AOA actually measures, why it’s more dependable than airspeed, and how it instantly shows whether you’re in the proper energy state for approach, maneuvering, or pattern work. You’ll learn how “on-speed” AOA keeps you in the ideal energy window, preventing a negative energy state when you’re too slow (stall risk) and avoiding excess energy when you’re too fast for landing. Most importantly, you’ll see how AOA gives you immediate situational awareness, allowing you to correct a bad trend long before it becomes a loss-of-control event. By the end of this webinar, you’ll walk away with simple, practical techniques you can apply on your very next flight, to dramatically improve stick-and-rudder precision, landing consistency, and overall safety. Qualifies for FAA WINGS credit.
Zenith Aircraft Kits & Plans
2:30 p.m.
Zenith Aircraft offers both high-wing and low-wing kits that are fun to fly and easy to build. They also offer plans for those on a tight budget. In this session, Sebastien Heintz and Roger Dubbert of Zenith Aircraft will discuss their designs and engine options to help you decide if this is the kit to build.
Weight and Balance
4 p.m.
Joe Norris, amateur built DAR, will cover the basics of how to perform a weight and balance calculation on your aircraft. He will then explain what calculations and paperwork the FAA inspector or DAR needs for your airworthiness application. Qualifies for FAA WINGS credit.
Can Homebuilt Accident Rates Be Fairly Compared?
5:30 p.m.
Ron Wanttaja will use 26 years of NTSB data to compare the accident rates of common homebuilt types. The math is easy enough, but the problem lies in doing it fairly. For instance, the additional hazards related to water operations may cause more accidents, but it’s not really the fault of the aircraft itself. Similarly, a higher rate for a design that appeals to less-experienced pilots may not be due to the aircraft itself. Ron will discuss these and other factors as he presents a head-to-head comparison of homebuilt accident rates.
Common Builder and Maintenance Errors
7 p.m.
Vic Syracuse will discuss the errors he sees repeatedly on pre-buy and DAR inspections. Vic is a nationally recognized expert in pre-buy examinations, condition inspections, and DAR services for amateur-built aircraft. He is author of Pre-Buy: Guide for Amateur-Built Aircraft, Are Your Nuts Tight: Guide to Identifying Problems on Your Amateur-Built Aircraft, and Maintenance Handbook for Van’s RV Aircraft. Qualifies for FAA WINGS and AMT credit.
-
January 26, 2026
Building an Aircraft — What You Need to Know
11:30 a.m.
This presentation will go beyond the actual building process to educate you on the FAA rules that apply to building your own aircraft, as well as insurance, liability, the repairman certificate, and much more. Join EAA Homebuilt Community Manager Charlie Becker to learn the things every builder should know about building their own aircraft.
Composite Construction Basics
1 p.m.
Learn the basics of how to work with composites in aircraft construction projects. EAA SportAir workshop instructor Scott Vanderveen will share what you need to know to be successful. Qualifies for FAA WINGS and AMT credit.
EAA Advocacy Update: Top Homebuilding Issues and MOSAIC, BVLOS, 100LL
2:30 p.m.
Join EAA’s Jack Pelton, Sean Elliott and Rob Hackman as they discuss current issues for owners and builders of amateur-built aircraft. In addition, they will cover MOSAIC/Sport Pilot 2.0, Beyond Visual Line of Sight (BVLOS) proposed new rules for Unmanned Aircraft Systems, 100LL fuel replacement, and other challenges to the aviation industry.
Getting Your Project Finished and Flying
4 p.m.
Serial builder Vic Syracuse will share strategies and tips for successfully completing your project. Vic is a nationally recognized expert in pre-buy examinations, condition inspections, and DAR services for amateur-built aircraft. He is author of the Pre-Buy Guide for Amateur-Built Aircraft, Are Your Nuts Tight Guide to Identifying Problems on Your Amateur-Built Aircraft & The Maintenance Handbook for Van’s RV Aircraft.
Panel Planning and Wiring
5:30 p.m.
This presentation is for builders who want to know how to plan and wire their aircraft. Marc Ausman, author of Aircraft Wiring Guide, will cover how to start thinking about and planning for the electrical system. Qualifies for FAA WINGS and AMT credit.
Van's Aircraft RV-15 Update
7 p.m.
Rian Johnson and Marc Cook from Van's Aircraft will review everything about the RV-15, the company's newest total performance aircraft. Designed as a STOL-capable, backcountry aircraft the RV way, with exceptional handling and cruise capability. They will update us on the status of kit production, shipping timelines, and a detailed discussion of the technical aspects of the RV-15.
-
January 27, 2026
Wiring Basics
11:30 a.m.
EAA SportAir Workshops Electrical Systems & Avionics instructor Dick Koehler discusses the basics of aircraft electrical wiring and tips for planning out your aircraft electrical system. Qualifies for FAA WINGS and AMT credit.
Fabric Covering Basics
1 p.m.
Learn the basics of fabric covering aircraft from EAA SportAir Workshop instructor Austin Jones, who is a technical specialist with Consolidated Aircraft Coatings in Riverside, CA. Austin will explain the Poly Fiber covering process and products. This is great information for anyone doing a new covering job or repairing an existing Poly Fiber covering process. Qualifies for FAA WINGS and AMT credit.
Sheet Metal Basics
2:30 p.m.
Sheet metal construction is the most popular material used in today’s kit aircraft. Mike Dooley will teach you how to work with sheet metal in this session. Mike is an instructor for the EAA SportAir Workshops sheet metal course and built an RV-8. Qualifies for FAA WINGS and AMT credit.
Dynon Avionics
4 p.m.
After hundreds to thousands of hours working on your airframe, it's time to decide how to equip your panel. In this webinar, we'll cover general considerations such as matching your avionics to your flying and budget, product choices, and configurations from Dynon Avionics.
Painting Your Plane: DIY or Use an Expert?
5:30 p.m.
The design and quality of your paint job will be the most visible representation of your build. In this forum, Craig Barnett, CEO of Scheme Designers, will cover the elements and concepts of a great paint scheme design, and its impact on cost and ease of application to your aircraft. Ken Reese, owner of KD Aviation, will discuss tips to prepare your aircraft for paint, layout, painting, and detailing to arrive at the best possible outcome. Qualifies for FAA WINGS and AMT credit.
Propeller Selection for Homebuilts
7 p.m.
Steve Boser from Sensenich Propeller will discuss how to choose the right propeller for your experimental aircraft. He will explain the black art of propeller design and how to make good choices for your homebuilt. Qualifies for FAA WINGS and AMT credit.
-
January 28, 2026
Flight Testing 101
11:30 a.m.
Paul Dye presents a look at the things a builder/pilot should consider in planning, training for, and executing a flight test program on their new homebuilt aircraft. This presentation looks at the goals and methods of flight testing, and how to manage potential risks to both pilots and the aircraft so that Phase 1 flight testing goes smoothly and productively. Qualifies for FAA WINGS credit.
TIG Welding
1 p.m.
The ability to make aircraft-quality welds opens up many aircraft designs for the homebuilder. TIG (Tungsten Inert Gas) welding is ideal for building aircraft-quality parts. EAA Homebuilt Community Manager Charlie Becker and Shaun Walker, EAA’s SportAir TIG welding instructor, will cover the basics getting started in TIG welding 4130 chromoly tubing. Qualifies for FAA WINGS and AMT credit.
Hardware for Homebuilts
2:30 p.m.
When starting to build, the homebuilder will need to learn the basics of AN hardware and many other aviation specific fasteners. In this webinar, Dick Koehler will explain how to properly use AN hardware and many other fasteners not commonly used outside of aircraft. Qualifies for FAA WINGS and AMT credit.
Advanced Flight Systems
4 p.m.
Rob Hickman from Advanced Flight Systems will discuss additional ways you can reduce your instrument panel installation time with an ADVANCEDPANEL.
Condition Inspections: Who and How
5:30 p.m.
Join Brian Carpenter from Rainbow Aviation Services, providers of light-sport repairman training, as he discusses who can perform maintenance, repairs, major changes, and annual condition inspections for experimental amateur-built aircraft. In addition, Brian will cover how to conduct the annual condition inspection. Qualifies for FAA WINGS and AMT credit.
Lessons From 200,000 Borescope Images
7 p.m.
The borescope is the gold standard for assessing cylinder condition. Savvy Aviation's Mike Busch A&P/IA demonstrates how to perform a proper cylinder borescope inspection. He discusses what to look for in borescope images, and offers analytical data obtained from the 200,000 borescope images that have been uploaded to Savvy's platform in the past two years. Qualifies for FAA WINGS and AMT credit.
-
January 29, 2026
Amateur-Built Aircraft Certification Process
11:30 a.m.
Before you can fly your homebuilt aircraft, you need to complete both the FAA registration and certification process. Join FAA Designated Airworthiness Representative Joe Norris as he explains what a builder needs to do to successfully navigate the FAA’s required processes.
Insuring Your Homebuilt
1 p.m.
In this webinar, Jim Stewart of Acrisure Aerospace discusses his most frequently asked questions that come up during AirVenture and other aviation events regarding insuring a homebuilt aircraft.
Sonex Aircraft Update
2:30 p.m.
Get an overview of all Sonex products, including the new Highwing! Sonex offers basic, economical, easy-to-build aircraft. Single and two-place aircraft are available. Two models, the Sonex and Sonerai, are available as plansbuilt aircraft. Sonex even offers single-place and two-place jet aircraft. All designs are fully aerobatic when flown as single-place aircraft.
Garmin Experimental Avionics Solutions
4 p.m.
A complete overview of the many offerings from Garmin for your experimental and light-sport aircraft. Topics covered by Brad Brensing, Garmin Experimental/LSA Sales Manager, will include screen selection, panel and remote mount avionics options, interface capabilities, and additional resources to help you in your homebuilt project planning journey!
Buying a Used Homebuilt
5:30 p.m.
Experimental Amateur Built aircraft, aka homebuilts, are increasingly popular for non-builders to purchase finished and flying. Vic Syracuse will share with you the things you need to know before buying a finished and flying homebuilt. Vic is a nationally recognized expert in pre-buy examinations, condition inspections, and DAR services for amateur-built aircraft. He is author of the Pre-Buy Guide for Amateur-Built Aircraft & Maintenance Handbook for Van’s RV Aircraft. Qualifies for FAA WINGS and AMT credit.
Lycoming Engine Installation
7 p.m.
Judson Rupert principal engineer, piston engineering for Lycoming Engines, will cover the things to consider when installing a Lycoming engine on your homebuilt. Judson is an experienced aircraft owner and A&P mechanic. Qualifies for FAA WINGS and AMT credit.
-
January 30, 2026
Staying Alive — Analysis of Homebuilt Fatal Accidents
11:30 a.m.
The EAA Homebuilt Aircraft Council provides an analysis of fatalities in experimental amateur built aircraft over the past 13+ years to identify common causes and elements of training or technology which could help reduce the chances of being involved in an accident. Qualifies for FAA WINGS credit.
Fly the Wing: AOA Demystified — Your Wing’s Real-Time Safety Gauge
1 p.m.
This presentation cuts through the mystery to flying with AOA. Michael Vaccaro will explain what AOA actually measures, why it’s more dependable than airspeed, and how it instantly shows whether you’re in the proper energy state for approach, maneuvering, or pattern work. You’ll learn how “on-speed” AOA keeps you in the ideal energy window, preventing a negative energy state when you’re too slow (stall risk) and avoiding excess energy when you’re too fast for landing. Most importantly, you’ll see how AOA gives you immediate situational awareness, allowing you to correct a bad trend long before it becomes a loss-of-control event. By the end of this webinar, you’ll walk away with simple, practical techniques you can apply on your very next flight, to dramatically improve stick-and-rudder precision, landing consistency, and overall safety. Qualifies for FAA WINGS credit.
Zenith Aircraft Kits & Plans
2:30 p.m.
Zenith Aircraft offers both high-wing and low-wing kits that are fun to fly and easy to build. They also offer plans for those on a tight budget. In this session, Sebastien Heintz and Roger Dubbert of Zenith Aircraft will discuss their designs and engine options to help you decide if this is the kit to build.
Weight and Balance
4 p.m.
Joe Norris, amateur built DAR, will cover the basics of how to perform a weight and balance calculation on your aircraft. He will then explain what calculations and paperwork the FAA inspector or DAR needs for your airworthiness application. Qualifies for FAA WINGS credit.
Can Homebuilt Accident Rates Be Fairly Compared?
5:30 p.m.
Ron Wanttaja will use 26 years of NTSB data to compare the accident rates of common homebuilt types. The math is easy enough, but the problem lies in doing it fairly. For instance, the additional hazards related to water operations may cause more accidents, but it’s not really the fault of the aircraft itself. Similarly, a higher rate for a design that appeals to less-experienced pilots may not be due to the aircraft itself. Ron will discuss these and other factors as he presents a head-to-head comparison of homebuilt accident rates.
Common Builder and Maintenance Errors
7 p.m.
Vic Syracuse will discuss the errors he sees repeatedly on pre-buy and DAR inspections. Vic is a nationally recognized expert in pre-buy examinations, condition inspections, and DAR services for amateur-built aircraft. He is author of Pre-Buy: Guide for Amateur-Built Aircraft, Are Your Nuts Tight: Guide to Identifying Problems on Your Amateur-Built Aircraft, and Maintenance Handbook for Van’s RV Aircraft. Qualifies for FAA WINGS and AMT credit.
2025 Homebuilders Week Archived Recordings for Members
01:09:40
Lock Icon
Webinar- Working With Wood 101 2025
February 19, 2025 | 117 Views
February 19, 2025 | 117 Views
Join EAA staff member and Pietenpol builder, John Egan who will share information on wood selection, construction techniques, and other important selected topics.
01:12:09
Lock Icon
Webinar- Liability of Selling Your Homebuilt 2025
February 04, 2025 | 123 Views
February 04, 2025 | 123 Views
Many builders express concern over seller’s liability. In this presentation, attorney Kathy Yodice will discuss the facts around this issue and steps a builder can take to reduce their risk. Kathy is the vice chair of the EAA Legal Advisory Council.
01:10:17
Lock Icon
Webinar- Common Builder & Maintenance Errors 2025
February 03, 2025 | 238 Views
February 03, 2025 | 238 Views
Vic Syracuse will discuss the errors he sees repeatedly on pre-buy & DAR inspections.
01:10:09
Lock Icon
Webinar- Weight and Balance 2025
February 03, 2025 | 128 Views
February 03, 2025 | 128 Views
Joe Norris, amateur built DAR, will cover the basics of how to perform a weight and balance calculation on your aircraft. He will then explain what calculations and paperwork the FAA inspector or DAR needs for your airworthiness application.
01:11:43
Lock Icon
Webinar- Zenith Aircraft Kits & Plans 2025
January 31, 2025 | 210 Views
January 31, 2025 | 210 Views
Sebastien Heintz and Roger Dubbert will discuss their designs and engine options to help you decide if this is the kit to build.
01:09:22
Lock Icon
Webinar- Staying Alive-Analysis of Homebuilt Fatal Accidents
January 31, 2025 | 191 Views
January 31, 2025 | 191 Views
An analysis of fatalities in experimental amateur built aircraft over the past 13 years to identify common causes and elements of training or technology which could help reduce the chances of being involved in an accident.
01:11:50
Lock Icon
Webinar- Van’s RV Aircraft Kits 2025
January 31, 2025 | 672 Views
January 31, 2025 | 672 Views
Van’s Aircraft will discuss their kits, the mission of each design, and provide an update on the development of the new RV-15.
01:10:33
Lock Icon
Webinar- Gas Welding 2025
January 31, 2025 | 113 Views
January 31, 2025 | 113 Views
Budd Davisson, Sport Aviation columnist and Homebuilders Hall of Fame inductee, will cover the advantages of gas welding and some tips on getting started.
01:11:45
Lock Icon
Webinar- Sonex Highwing Update 2025
January 31, 2025 | 101 Views
January 31, 2025 | 101 Views
Get all the latest information on the new Sonex Highwing! Sonex owner and president Mark Schaible will brief the audience on the progress of the first prototype aircraft.
01:10:23
Lock Icon
Webinar- Garmin Experimental Avionics Solutions 2025
January 30, 2025 | 199 Views
January 30, 2025 | 199 Views
Brad Brensing, Garmin Experimental/LSA Sales Manager, will discuss screen selection, panel and remote mount avionics options, interface capabilities, and additional resources.
01:10:36
Lock Icon
Webinar- Amateur-Built Aircraft Certification Process 2025
January 30, 2025 | 166 Views
January 30, 2025 | 166 Views
Join FAA Designated Airworthiness Representative Joe Norris as he explains what a builder needs to do to successfully navigate the FAA’s required processes.
01:10:00
Lock Icon
Webinar- EAA Advocacy Update- Top Homebuilding Issues and the Impact of MOSAIC 2025
January 30, 2025 | 135 Views
January 30, 2025 | 135 Views
Join EAA’s Jack Pelton, Sean Elliott and Rob Hackman as they discuss current issues for owners and builders of amateur-built aircraft and challenges to the aviation industry.
01:08:31
Lock Icon
Webinar- Advanced Flight Systems 2025
January 30, 2025 | 132 Views
January 30, 2025 | 132 Views
Rob Hickman from Advanced Flight Systems will discuss additional ways you can reduce your instrument panel installation time with an ADVANCEDPANEL.
01:16:51
Lock Icon
Webinar- Data-Driven Diagnosis of Engine Issues
January 30, 2025 | 84 Views
January 30, 2025 | 84 Views
Mike Busch A&P/IA offers a series of real-life stories that demonstrate how engine monitor data analysis can be used to provide precise, accurate, pinpoint diagnosis.
01:10:34
Lock Icon
Webinar- Engine Selection Basics 2025
January 30, 2025 | 107 Views
January 30, 2025 | 107 Views
This presentation will review considerations of engine acquisition options including certificated versus experimental engines and rebuilt versus overhauled. It will also review basic engine terminology and nomenclature.
01:10:28
Lock Icon
Webinar- Buying a Used Homebuilt
January 29, 2025 | 95 Views
January 29, 2025 | 95 Views
Vic Syracuse will share with you the things you need to know before buying a finished and flying homebuilt.
01:10:02
Lock Icon
Webinar- Composite Construction 2025
January 29, 2025 | 107 Views
January 29, 2025 | 107 Views
Learn the basics of how to work with composites in aircraft construction projects. EAA SportAir instructor Scott VanderVeen will share what you need to know to be successful.
01:10:11
Lock Icon
Webinar- Flight Testing 101 2025
January 29, 2025 | 162 Views
January 29, 2025 | 162 Views
Paul Dye presents a look at the things a builder/pilot should consider in planning, training for, and executing a flight test program on their new homebuilt aircraft.
01:26:49
Lock Icon
Webinar- Designing the Perfect Paint Scheme and its Impact on Budget
January 29, 2025 | 123 Views
January 29, 2025 | 123 Views
This session will not only help you develop the best paint scheme to highlight the beauty of your aircraft, but will also help you develop your design within a frame work of living within a budget for applying the paint scheme design.
01:09:41
Lock Icon
Webinar- Hardware for Homebuilts
January 29, 2025 | 139 Views
January 29, 2025 | 139 Views
In this webinar, John Cox will explain how to properly use AN hardware and many other fasteners not commonly used outside of aircraft. John is a manager of EAA’s SportAir Workshop program and an A&P/IA mechanic.
01:12:07
Lock Icon
Webinar- Getting Your Project Finished and Flying
January 29, 2025 | 125 Views
January 29, 2025 | 125 Views
Serial builder Vic Syracuse will share strategies and tips for successfully completing your project. Vic is a nationally recognized expert in pre-buy examinations, condition inspections, and DAR services for amateur-built aircraft.
01:12:10
Lock Icon
Webinar- Dynon Avionics 2025
January 29, 2025 | 154 Views
January 29, 2025 | 154 Views
In this webinar, we'll cover general considerations such as matching your avionics to your flying and budget, product choices, and configurations from Dynon Avionics.
01:10:13
Lock Icon
Webinar- TIG Welding 2025
January 28, 2025 | 172 Views
January 28, 2025 | 172 Views
Charlie Becker of EAA & Shaun Walker, EAA’s SportAir TIG welding instructor,
01:10:16
Lock Icon
Webinar- Wiring Basics 2025
January 28, 2025 | 165 Views
January 28, 2025 | 165 Views
EAA SportAir Workshops Electrical Systems & Avionics instructor Dick Koehler discusses the basics of aircraft electrical wiring and tips for planning out your aircraft electrical system.
01:16:49
Lock Icon
Webinar- Rotax 9 Series Installation & Operation 2025
January 28, 2025 | 138 Views
January 28, 2025 | 138 Views
Phil Lockwood of Lockwood Aviation Supply, will provide installation and operational tips on the Rotax 912, 915 and 916 engines.
01:11:48
Lock Icon
Webinar- Panel Planning and Wiring 2025
January 28, 2025 | 304 Views
January 28, 2025 | 304 Views
This presentation is for builders who want to know how to plan and wire their aircraft. Marc Ausman, author of Aircraft Wiring Guide, will cover how to start thinking about and planning for the electrical system.
53:10
Lock Icon
Webinar- The Need for Speed – Kitbuilt Options
January 28, 2025 | 143 Views
January 28, 2025 | 143 Views
A review of go-fast kitbuilt aircraft options and a discussion of some of the related considerations which may have impacted their market success.
01:08:06
Lock Icon
Webinar- Fabric Covering Basics 2025
January 27, 2025 | 155 Views
January 27, 2025 | 155 Views
Learn the basics of fabric covering aircraft from EAA SportAir Workshop instructor Nate Hammond. Nate, an A&P mechanic, has restored just about every style of fabric-covered aircraft in existence.
01:09:07
Lock Icon
Webinar- Sheet Metal Basics 2025
January 27, 2025 | 170 Views
January 27, 2025 | 170 Views
Sheet metal construction is the most popular material used in today’s kit aircraft. Mike Dooley will teach you how to work with sheet metal in this session. Mike is an instructor for the EAA SportAir Workshops sheet metal course and built an RV-8.
01:10:06
Lock Icon
Webinar- Building an Aircraft — What You Need to Know 2025
January 27, 2025 | 213 Views
January 27, 2025 | 213 Views
Join EAA Homebuilt Community Manager Charlie Becker to learn the things every builder should know about building your own aircraft.
